o w n e r ' s m a n u a lTHE SINGER'S ULTIMATE CHOICETMRDTX-9909KDTX-9909K700W MAX 7.1 Surround Sound Receiver with Professional Karaoke 7
10Signal to noise ratio (A weight) 80% mod 999KHz dB 40 50-Distortion rate 80% mod 999KHz %-1.0 5.0Audio output L/R output 999KHz mV 125 180 26
11About the Remote Control• The area between the remote control and the main unit must be clear of large obstacles.• Do not expose the remote control
12Connecting SpeakersThe Speaker Terminals are located on the rear panel. There are two FRONT terminals, one CENTER terminal, Two SUR-ROUND terminals
13Determining the proper way to connect the speaker cables:The speaker cable is a pair of insulated cables running side by side. One cable is colored
14Connecting to the REC OUT jacksThe L/R (red and white) RCA Record Output jacks on the rear panel can be connected to any self-powered input devicewi
15Connecting to the DTX-9909K’s InputsThere are 5 available A/V input channels which allow you to connect up to 5 A/V players to the DTX-9909K: DVD, A
16 Connecting to a TV using
17Connecting a DVD Player Video using S-Video InputsThere are 5 available S-Video inputs located on the rear panel. NOTE: Make sure you connect each p
18Connecting a DVD Player Video using the Compo-nent Video Input(s)There are Component Video (Y, Pb/Cb, Pr/Cr) inputs mponent Video (Y, Pb/Cb, Pr/Cr)
19Connecting a CD or Tape Player (audio-only)Use the CD and TAPE inputs on the rear panel to connect audio-only devices (CD, Mp3, tape players) with R
20Digital Audio OptionsThe DTX-9909K allows you to utilize the premium sound experience that digital audio offers by providing fi ve digital au-dio inp
21Connecting a Player with Digital Coaxial Audio Out-puts There are 3 Digital Coaxial audio inputson the DTX-9909K DTX-9909K DTrear panel: COAX1, COAX
22Connecting MicrophonesYou can connect up to 2 microphones to the DTX-9909K using ¼” microphone cables.What you will need• 2 microphones• 2 ¼” microp
23 1. Input/Adjust control - Cycles through the available input channels when in input mode or adjusts the parame
24 7. DSP / # (Digital Key Control) button - Cycles through the virtual EQ settings: CHURCH, DISCO, HALL, JAZZ, L
25 11. Master Volume control - Controls the music volume. Turn clockwise to raise the music volume and counter-c
26
27
28
29
3FCC Information ...4Listening for a Lifetime ...5Safety Instructions ...
301. Standby button - When the receiver’s main power is on, use this button to turn Standby Mode on and off. Standby mode is similar to tu
3111. F.B-EX (feedback eliminator) button - In Karaoke Mode*, use this button to cycle through the 3 levels of DSP feedb
32 26. DTS, DTX ES button - Use this button to select the correct DTS or DTX ES setting. Select DTS when playing a disc that is f
33 1. Decoder indicators - Indicates which decoder(s) is being used.2. Input source indicators - Light up to indicate which input source is bein
34Turning the Power On and Off1. Press the POWER button on the front panel to turn the power on. “Initializing...” will appear in the display pa
35The DTX-9909K has a built-in AM and FM tuner that allows you to listen to your favorite radio stationsConnecting the AntennasThe antennas must be co
36Preset StationsAutomatic Preset Storing1. Make sure TUNER is selected as the input source2. Press the TUNER AUTO button on the remote control to sel
37Speaker Settings MenuIn order to adjust the speaker settings, the DTX-9909K eaker settings, the DTX-9909K eaker settings, the DTXmust be in Music Mo
38•S Speaker (Surround Left and Right Speakers)Use the Input/Adjust knob on the front panel or the and buttons on the remote control to select the p
39• SW VOL (Subwoofer volume)Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the level.Level range:
This product, when installed as indicated in the instructions contained in this
40The DTX-9909K will be in Karaoke Mode whenever there is at least one microphone connected to the microphone inputs.Turning Karaoke Mode On1. Insert
41•MIC1 VOL (Microphone channel 1 volume)Use this setting to set the maximum volume level for micro-phone channel 1. NOTE: If this is set too low, th
42•RVB TIME (Microphone DSP reverb time)Use this setting to set the reverb time for the DSP micro-phone reverb effect.NOTE: The DSP effect volume must
43Surround Sound SetupThe speaker layout below shows the standard ITU-R speaker setting. You can use it to enjoy CINEMADSP, multi-channel audio sourc
44Playback Mode Display Abbrevations and Full Working NamesNODisplay AbbreviationFull working name1DTS DIG DSNDDTS Digital Surround2DTS ES MTXDTS ES M
45Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator on the front panel display does not light up).A “humming” sound can b
46ProblemCauseRemedyPreviously preset stations can no longer be tuned in.The desired AM station cannot be tuned in with the automatic tuning methodThe
47Resetting the Factory PresetsTo reset all of the DTX-9909K’s parameters to the original factory settings, follow the instructions below. This proce
48Index2/5 Stereo 242/7 Stereo 242/7 Stereo / 2/5 Stereo button 242/7 Stereo button 327.1 input channel button 318Ω & 4Ω Impedence Selector s
49Index cont.NNavigating through the Karaoke Mode Settings Menu 40Neo. 6 CIN 44Neo. 6 CINEMA 44Neo. 6 MUS 44OOK 42OPT1 Digital Optical Audio inpu
This product, when installed as indicated in the instructions contained in this
50NOTES
DTX-9909K owner’s manual © VocoPro 2008v1.0www.vocopro.com
Safety InstructionsCAUTIONRISK OF SHOCKCAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside.
And thank you for purchasing the DTX-9909K from VocoPro, your ultimate choice in Karaoke entertainment! With y
8Features• 7.1 Dolby Digital Surround EX Decoder• DSP Vocal Reverb• DSP Feedback Reducer• 7 Input Channels (5 audio/video, 2 audio-only)• Treble and B
9NOTest item Test conditionUnit Technology requirement 1 Input Sensitivity Input 1KHz signal, output 8Ω load,distortion=1%mVL/R/C/SL/SR/SBL/SBR=200~
Comentários a estes Manuais